![]() P-47 Thunderbolt (bubble top)/Option 1 (ARF parts)/FFF/WINGS (250x210x210)/Wing middle right.factory.P-47 Thunderbolt (bubble top)/Option 1 (ARF parts)/FFF/WINGS (250x210x210)/Wing middle left.factory.P-47 Thunderbolt (bubble top)/Option 1 (ARF parts)/FFF/WINGS (250x210x210)/Wing inner right.factory.P-47 Thunderbolt (bubble top)/Option 1 (ARF parts)/FFF/WINGS (250x210x210)/Wing inner left.factory.P-47 Thunderbolt (bubble top)/Option 1 (ARF parts)/FFF/GEAR DOORS/gear doors right.factory.P-47 Thunderbolt (bubble top)/Option 1 (ARF parts)/FFF/GEAR DOORS/gear doors left.factory.Cura profiles/COLORFABB LW-PLA.curaprofile.bonus extra items/1mm wire lock/stl/1mm wire stop clamp B.stl.bonus extra items/1mm wire lock/stl/1mm wire stop clamp A.bonus extra items/1mm wire lock/G-CODE/1mm wire stop clamp A + B.gcode. ![]() bonus extra items/1mm wire lock/fff/push rod lock 1mm.factory.bonus extra items/1.2mm wire lock/stl/1.2mm wire stop clamp B.stl.bonus extra items/1.2mm wire lock/stl/1.2mm wire stop clamp A.stl.bonus extra items/1.2mm wire lock/g-code/1.2mm wire stop clamps.gcode.bonus extra items/1.2mm wire lock/fff/push rod lock 1.2MM.factory.(Marked with indentation)īATTERY: 4500mah 4S 50c (420g) (or similar)įor any questions and assistance please email us All STL files need to enlarged to 1000% if using a program other than simplif圓d. This model is recommended for the pilots with intermediate level building and flying skills.ĬENTER OF GRAVITY 60mm aft of L.E at wing root. LW-PLA Tail option: The stabilizers and control surfaces for the tail can be printed in LW-PLA, reducing the ballast weight required in the nose. Gear option 3: Wing “C” is designed to suit a cheaper gear leg using a standard 2.5kg 90 degree retract. Gear option 2: Wing “B” is designed to suit a cheaper gear leg using the E-FLITE 84 degree retract. Gear option 1: Wing “A” is designed to suit the E-FLITE 1200mm gear leg and 84 degree retract. This model comes with different build options depending on your budget and desire for use of parts and components. Links to components used can be found on the last page of the user guide. A one-piece wing mounts to the fuselage with nylon bolts and the tail stabilizers are quickly removable in case of sustaining damage. Utilizing up to 7 channels Ailerons, Elevator, Flaps, Rudder,Throttle, Landing gear and Gear doors, this model is sure to turn some heads at the local flying field. ![]() Designed to suit the 3548 900kv motor this model has a significant amount of power and is happy to cruise around at 40% power thanks to its lightweight yet sturdy construction. This replica of the P-47 Thunderbolt is designed for quick and easy construction and printed using a combination of regular PLA and lightweight PLA (LW-PLA). ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |